oben3
add

    OLBRICH

Seite1logo

  ....Innovation im Prüfbereich

Testing Equipment ......

Cupping Tester

A world reference instrument to efficiently assess the

elasticity and cupping resistance of various coatings. The sampie panel (max. 1,25 mm thick x 90 mm width, coated min. 0.3 mm) is clamped by an upper wheel and manually

cupped by a 020 mm hemispherical indenter onto a 027 mm die by a drive wheel. The depth to cause failure is indicated on aprecision scale, graduated 0-7 mm, in increments of 0.1 mm. The test results can be easily observed with an illuminated magnifier.

Features

  • Robust mechanical construction for minimal maintenance (] High reproducibility
  • Supplied with iIIuminated magnifier
Tiefungsprüfer

Ordering references

Cupping Tester

        Ref No

  • 760      Cupping Tester complete

Standards

  • BS               3900 E4
  • DIN EN ISO  1520

Cupping tester

The cupping tester has been designed for determining the elongation and deformability of single- and multiple-layer systems on metal substrates.

  • Electrohydraulic drive for highly reproducible results
  • Easy to use eccentric clamping ring
  • C-opening accepts large and small test panels
  • For test panels with a thickness of up to 0.06 in (1.5 mm
  • Uniform cupping speed of 0.008 in/s (0.2 mm/s)
  • 3 keys to control all functions
  • Digital display, resolution 0.1 mm

Stereo Microscope for cupping tester

This stereo microscope with illumination and brightness control is designed to observe the paint surface during the test.

  • 2x and 4x magnification
  • 3D-image with shadowless illumination
  • Ergonomic working position

Procedure
– Insert the test panel into the C-opening of the instrument
– Clamp in the sample firmly
– Start cupping and simultaneously observe the process through the stereo-microscope
– Apparatus presses the cap of the spherical punch into the test panel at uniform speed (0.2 mm/s)
– As soon as the first cracking is visible, stop the movement of the punch
– Read the cupping depth on the digital display and reset the punch
– Always carry out 3 tests for each sample

 

P5400b

Standards

  • DIN EN ISO  1520
  • Erichsen Cupping

Ordering Information

Technical Spezifications

Ref No                                   Description

 

5400                                      cupping tester

Spherical Punch          Ø20mm  (Ø 0,8 in )

5411                                     Stereo Microscope for cupping tester

Sheet Holder               Ø 33 mm ( Ø 1,3 in )

 

Die                                 Ø 27 mm ( Ø 1,06 in )

 

Voltage                         230 V/50 Hz or 115 V / 60 Hz ,built in swtch

 

Current Indicator        max. 4 A (230 Volts)

 

Dimension                  650 x 280 x 600 mm( 26 x 11 x 24 in )

 

Weight                           65 kg ( 143 Ibs) incl. Microscope and Packing

Comes complete with:

  • cupping tester,
  • Connection cable and plug
  • Operating instructions

Note: Stereo microscope has to be ordered separately

NavUp
[englishhome]

Please contact our Webmaster with questions or comments. ©Copyright 2008 herbros -olbrich know how -All rights reserved